Smarts Tips for Your Family

Conditions of open parking spaces for motorcycles often make apes who forgot entrust biker helmet. Because, when it starts to rain, protective headgear it could turn into a water reservoir. Conditions wet, dirty, moist, and smell bad can cause an uneasy feeling every time contact with the skin, certainly very disturbing way.

Just as the completeness of other compulsory wear when riding, the helmet is also important to be treated on a regular basis, of course, to avoid the appearance of the musty smell. It's easy, just cleaned with warm water and cleaning fluids. Before cleaning, set up equipment such as toothbrushes, Q-tips, clean cloth, foam, and cleaning products.

1. Nearly most of the parts will be stripped helmet, difficult to replace if unsure, use the cell phone picture on the outside and inside for installation reference.

2. Disassemble all parts of the helmet slowly. Some manufacturers usually include removing components in the manual. If the first did, you should be careful, remove only the easy part. Then put all the pieces neatly for easy reference during installation.

3. Typically, removable cheek pads. After that, the helmet shell flush with warm water, then wash with the help of a little baby shampoo. Rub gently, then rinse, repeat several times until all the dirt falls out. Do the same thing on the cheek pads.

4. Drain in a cool helmet. If you want to finish faster, it is recommended to use a fan, not air conditioning.

5. Wipe the windshield with a clean cloth combination with a soft surface (microfiber), warm water and a little soap. Prioritizing put fingers to remove dirt in order to minimize the possibility of blisters. Allow to dry without tool assistance.

6. To clean the outer surface, if it is dry, use enough water, do not use chemicals because it can erode gloss coating. Use a cotton bud and a toothbrush to clean difficult to reach areas. Repeat all the steps several times until it is completely clean.

7. Raft back helmet correctly. If not sure, use a photo as a reference. No need to rush, make sure everything is installed properly.

Scorching heat and heavy rains come now uncertain. Inevitably the natural conditions cause some adverse effects on the car. One of them arising as a result of auto glass mushroom in rain droplets dry because of the heat.

Clean it not just makes it shiny or beautiful. Without realizing it, the glass looks clear will help visibility when driving. Clearer view, especially at night is good to eliminate light refraction effect from the outside. No need to spend a long time to make it happen, we scout car so you make the glass clear and clean.

Before starting, it is worth noting that most glass cleaners containing ammonia. Compound of nitrogen and hydrogen (NH3) is often used as a very powerful mix for mildew and spots disappear, due to the dirty water that has dried up old or used animal dung.

But beware, not all match the original car glass (Japan, Korea or Europe). Types of tinted windows are not in accordance with the application materials. The effect is not glass so clean, just add opaque. To find auto glass specification, can be seen in the bottom corner. Also you can see in the product label says "ammonia free" or "safe for tinted windows".

Here are the steps to eliminate mold and clean the glass.

1. Clean the windshield with clean water.

2. Sure where to wash and polish the glass protected from the hot sun. This can cause the cleaner lookups dries quickly, and leaves a residue which resulted in the emergence of flex on the glass surface.

3. Use a microfiber cloth to get the most current polish, if no, can use ordinary cloth.

4. Rub or spray the glass to be cleaned using drugs and then wipe with a cloth to look clear.

5. Rinse the area with water. Continue until the entire glass polished.

6. FIRST windshield because it has a high degree of difficulty. Do not worry when the drug glass polishing touches the car body, quickly rinse the surface with water so as not to damage the paint.

7. Repeat the above process if you are not getting maximum results.

8. Read some regulations on glass cleaner because there are certain specifications that must be considered, although in general all have the same steps.